Water, power, batteries, temperature, security, GPS and equipment — all under control from your phone 24/7.
14:32 — shore power connected
13:15 — voltage normal
09:42 — water detected in bilge
Specific parameters. Clear notifications.
Instant alert when water is detected in the bilge or other areas.
Voltage, battery charge and shore power.
Impact, motion, opening, tilt and siren.
We detect strong impacts against a pier, dock or obstacle.
GPS, tracking, movement history and geofences.
Bilge pump monitoring and automatic activation.
Monitor entrances and the status of doors and hatches.
Push, SMS, email and Telegram.
The system reports problems immediately while you are away from the boat.
The sensor detects rising water levels and immediately sends an alert to your phone. The system shows the current level and tells you whether the pump has switched on, so you can act in time.
The system continuously monitors battery voltage. If the charge drops to a critical level, you receive an alert and can check the batteries or connect power in advance.
When shore power is lost, the system immediately reports the disconnection and records the switch to battery power. You know about the problem before it affects the equipment.
The sensor detects a sharp impact or strong vibration and sends a warning. This helps you quickly check the yacht after a collision, storm, mooring incident or other unusual situation.
The system monitors doors and access zones and reports unauthorized entry. The alert arrives immediately so you can check the situation and take action if needed.
Start with basic protection and expand the system as needed.
Answer a few questions — we’ll recommend the right SmartBoats configuration.
We received your yacht information and will contact you with SmartBoats system recommendations.
We build the system from available, proven components.
NMEA2000
Your boat is no longer out of reach at the dock. Control connected systems from your smartphone — from home, the office or on your way to the marina.
Switch navigation and anchor lights on before you head out, start the heater, check power and batteries, open or close electronic locks, and control other connected devices with a single tap.
The system grows with your boat.
Choose the equipment — we'll check compatibility and prepare an exact configuration.
Tell us about your boat and your needs — we will contact you and suggest a suitable solution.
We'll receive your selected sensors and equipment and contact you to confirm the installation.